Gai-tronics CommandPLUS Series Desktop Console Installation an Manual do Utilizador descarregar pdf (Página 33)

CommandPLUS Series Desktop Console Installation and Service Manual Console Diagnostics

29 12/10

Setting the Clock

The clock can be adjusted by selecting the Set Clock and Date menu. When selected, the following

display is shown.

SET CLOCK/DATE

HH:MM:SS PM MM-DD-YY

<SCROLL> TO SELECT <MODE> TO EXIT

<1-9> TO SET VALUE <TRANSMIT> TO SET

12:22:19PM VU

MAY-12-07

Figure 12. Set Clock and Date Menu

The hours field of the displayed time flashes to indicate that the clock can be set to the correct hour. To

alter the flashing value, enter the desired value directly from the keypad. After the two digits have been

entered to set the hour, the minutes field begins flashing indicating that the minutes should now be

entered. This continues through the seconds, month, day and year fields. After the seconds field has

been entered, AM or PM must be selected using 1 for AM or 2 for PM.

The

SCROLL Up or Down button can be used to move between the different fields without entering a

new value. To advance to the next field without altering the value that is currently flashing, press the

SCROLL Up button. To the previous field without altering the value that is flashing, press the SCROLL

Down button.

When the correct time and date appear in the display, press the

TRANSMIT button to set the time and date

and exit the Set Clock/Date menu.

Setting the Display Viewing Angle

The console is normally viewed from a particular angle. Adjust the display so that it appears sharpest at

this angle. To perform this adjustment, press 2 from the Clock and Display Set menu. The screen shown

below is displayed.

ADJUST DISPLAY VIEWING ANGLE

VIEWING ANGLE = 5

<SCROLL UP/DOWN> TO INCREASE/DECREASE

<0-7> TO SET VALUE <MODE> TO EXIT

12:22:19PM VU

MAY-12-07

Figure 13. Viewing Angle Adjust Menu

To adjust the viewing angle from this screen, use the

SCROLL Up/Down buttons or enter a value from 0

through 7 directly from the numeric keypad. Continue to adjust the viewing angle until the display

appears sharpest when looking at it from your normal work position. Press the

MODE button to save the

displayed viewing angle and return to the Clock and Display Set menu.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 61 62

Sem comentários

Gai-tronics CommandPLUS Series Desktop Console Installation an Manual do Utilizador Página 33