Gai-tronics XCP0010A DC Control Kit Manual do Utilizador descarregar pdf

Pub. 43003-012B

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374 n 800-492-1212 n Fax: 610-775-6540

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Model XCP0010A DC Control Kit

Field Installation Kit Instructions

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains

sensitive business and technical information that is confidential and proprietary to GAI-Tronics.

GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,

and such information may only be used in connection with the operation of your GAI-Tronics product or

system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any

third party.

General Information

The XCP0010A DC Control Kit for the ICP9000 Series Desktop Console or the ICP9000 Navigator

Series MCU provides standard dc control on a per channel basis. One XCP0010A kit is required for each

dc-controlled radio channel.

The XCP0010A DC Control Kit includes the following components:

Qty Description

1 CDC printed circuit board

#4-40 × ¼-inch Phillips SEM screw

Installation

ICP9000 Series Desktop Console

1. Disconnect power from the ICP9000 Series Desktop Console.

2. Remove the 7 screws securing the top panel and gently lift the cover exposing the attached speaker

cable and master display cable. See Figure 1 on page 2.

1 2 3 4

Pub. 43003-012BGAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA610-777-1374 n 800-492-1212 n Fax: 610-775-6540VISIT WWW.GAI-

Pub. 43003-012BModel XCP0010A DC Control Kit Page: 2 of 411/023. Disconnect the speaker cable at the male-to-female connection point. Unplug the ma

Pub. 43003-012BModel XCP0010A DC Control Kit Page: 3 of 411/025. Mount the XCP0010A DC Control Option CDC PCBA to the appropriate slave PCBA (1, 2,

Pub. 43003-012BModel XCP0010A DC Control Kit Page: 4 of 411/02Figure 3.7. Fasten the CDC PCBA to the inner PCBA mounting plate using the 3 supplied

Sem comentários

Gai-tronics XCP0010A DC Control Kit Manual do Utilizador